Zn/Zinc Adhesive Wheel Balance Weights Z110

February 10, 2018

Standard: Standard

Condition: New
Material: Zn
Trademark: Hopson
Origin: Zhengjiang, Ningbo

Type: Wheels Localizer
Certification: ISO
Description: Zinc Adhesive Balance Weights
Port: Ningbo
Specification: 50pcs/box, etc. Customized

Booth Number.: 11H26

General Info:

Part No.: Z110

Height:4.0mm(include tape 5.0mm)

Width:18mm

Length:130mm

Packing: 100strips/box, 4boxes/ctn, customized is also welcomed

The 60grams zinc adhesive strip, made up of 6x10 grams segments.

OEM is welcomed.

Installation of Adhesive Weights:

Pre-treating the rim:

Clean the rim thoroughly with a cleaning agent that is compatible with varnish(e.g. IPA 70%) in order to remove any residual grease, silicone or adhesive.

Please note: A minimum of 15ºC is required in terms of both the room temperature and the rim temperature.

Pre-bending the weights:

Separate the correct gram(as calculated) from the bar. Mould the shape of the weight to match the rim radius(with protective film).

Please note: You need to bend the weights gradually, otherwise they will break apart at the joins. You should bend the weight to a little more than the rim's radius.

Removal of the protective film:

Remove the protective film.

Please note: Do not touch the glued surface after peeling off the rim.

Sticking the weight on:

Attached the weight to the calculated point on the rim, making sure that the weight is distributed evenly either side and the weight is parallel with the edge of the rim.

Please note: Press down on the weight hard, working from the centre to the left and right. A minimum pressure of 1kg/cm2 is required. The angle of the sticking surface should not be higher than 15 ºC to normal.

Points:

1. Excellent balance weight suppliers and professional production.

2. Neat and compact appearance, popular design well accepted to the market.

3. Made of steel material, environment friendly.

4. Zinc plated, provide wonderful surface to fit the rims and anti-rusty.

5. Superior quality, high standard, good reputation, reasonable price

6. Fashionable package for safe and easy pick-up.

7. ISO9001:2008 Certificate

PLS NOTE: When you send us inquiry letter , kindly pls include the following information if possible:

Part No.:

Qty:

Any detailed requirements!

It will help us reply to you efficiently. Thank you.

Samples are available to send.

Don't miss the opportunity to check our full range of tire repair products.

The above is the Zn/Zinc Adhesive Wheel Balance Weights Z110 we have listed for you. You can submit the following form to obtain more industry information we provide for you.

You can visit our website or contact us, and we will provide the latest consultation and solutions

Share to:

Send Inquiry

Previou:Steel Adhesive Wheel Balance Weights F160

Next:Fe/Steel Adhesive Wheel Balance Weights F190