Machine tool casting defects repair

Jingrui measuring machine defect casting machine repair: Through several traditional welding repair defects in the machine tool repair results, analysis of the causes of poor results of machine tool casting repair. Through the research on the repairing results of casting defects repairing machine on the machine tool casting, a feasible and feasible technique of repairing on the machine tool casting and its process are determined. Jing Rui casting defect repair machine to repair the casting defects, casting repair process, does not heat, no deformation, no cracks, welding point metal dense, no hard points, no annealing, you can carry out any mechanical Processing. The choice of materials is not subject to the material constraints, through the choice of different materials complement material, you can achieve the performance of welding point, the color and the mother of unity. Complementary materials and the mother for the metallurgical combination of high strength, will not produce fall off Welding quality in line with the casting quality inspection standards, is worthy of widespread promotion of a new technology. However, the welding repair range of the casting defect repair machine is Φ1.5-Φ1.2mm. The repair and efficiency are the only factors restricting its widespread application in the process of repairing large area defects. For large defects in machine tool castings, we recommend the traditional welding repair process and casting defects repair machine composite applications.